Product Category menu

Category background

brake resistor nikan

Product Thumnail Image Zoom

[Basic Infomation]
Trader

[samen.co]

  • Iran Iran
Add to My Interests Send Inquiry
Product Detail Information

Features: 


  •         Custom built resistors to meet your requirements.
  •         High Power and Excellent load life stability.
  •         Excellent short time over load.
  •         Strongly resistant to moisture & solvent.
  •         Self-extinguish material is used in moldings.
  •         Non-inductive type also available.
  •         High-surge- resistant items are also available

General Specifications: 

 

 


 

Operating Temp.

-55°C TO +275°C

Insulation Resistance

20MOhm MIN

Dielectric Strength

AC 1000V, 2000V for 1 min

Temp. Coefficient

50 ppm/°C, 100 ppm/°C, 260 ppm/°C

Short Time Over Load

10 X Wattage Rating, 5 sec

Moisture resistance

temp 40°C moisture 95% DC100v500h

Thermal Shock

Wattage Rating 30min. -25°C, 15min

Vibration

10c/c ~ 50 c/s ~ 10 c/s (1min) -2h each of paralleled and right angle.

Load Life

Wattage Rating 1.5 h On, 30min off, 1000h

De-rate to zero

at 275°C

 

Mechanical Data 

 

 

Watts@ 20°c with heat sink

Watts@ 20°c without heat sink

DIMENSIONS (MM)

Approx. Weight (g)

L1

L2

W

H

D

60

48

115

100

40

20

4

110

80

64

140

125

40

20

4

150

100

80

165

150

40

20

4

180

120

96

190

175

40

20

4

240

150

120

215

200

40

20

4

300

200

140

165

150

60

30

5.3

500

300

210

215

200

60

30

5.3

700

400

240

265

250

60

30

5.3

850

500

300

330

315

60

30

5.3

1000

750

450

330

315

80

40

5.3

1900

1000

600

400

385

80

40

5.3

2300

1200

720

495

480

80

40

5.3

2900

1500

900

550

535

80

40

5.3

3200

 

Recommended Heat Sink Size for additional optimum performance:

 60W-120W:     200 x 200 x 3 mm

150W-300W:    300 x 300 x 3 mm

400W-500W:    450 x 450 x 3 mm

If finned heat-sink is used, surface area should be equal to the above heat sink area.

 

 

 

Construction

SBH: The resistive element is a low ppm resistance wire that is wound on a special grade porcelain tube. The terminals have fully welded construction to provide a good mechanical and electrical contact. The assembly is embedded in the aluminum casing. The aluminum casing is made from high quality heat sink grade material, which helps to dissipate the heat from the resistor at the faster rate resulting low change of resistance with respect to temperature, as resistance varies in direct proportion to temperature. The casing is filled with high purity and special silica sand to extract the heat from the resistor body at the slower rate. The conduction of heat thorough the sand brings uniform heat to the aluminum casing for further dissipation. This protects the panels from being heated internally. Terminal contacts are provided with the screw arrangement for easy wiring.

 

 

 

Electrical Characteristics

  • 1) On Heat Sink 60W~500W
  • 2) Free Air 60W~150W
  • 3) Free Air 200W~300W
  • 4) Free Air 400W~500W

Fig - Maximum dissipation (Pmax) in percentage of rated power as a function of the ambient temperature (Tamb)  

Application  Information:

Braking resistors are used with inverters, driving motors with a dynamic load that requires to be stopped quickly, such as lifts, cranes, or high-speed mechanisms. The braking resistor is connected in the DC link, between the rectifiers and the switching semi-conductors. When the DC voltage rises, to a pre selected limit, a chopper circuit switches in the braking resistor thereby allowing excess energy to be "dumped" in the form of heat, instead of causing damage to the inverter. When the DC level drops to a lower preset minimum limit the braking resistor is switched out of circuit until it is required again.

 

 

 

 

 

 

 

Product Detail Image

brake resistor nikan